Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codeE58
ApplianceWasher
Affected model seriesEFLS617SIW, EFLS517SIW, EFLS417SIW
Quick answer
Electrolux washer code E58 indicates high current on a motor phase.
Model compatibility: Electrolux reuses codes across series and control generations, so E58 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
If your Electrolux washer shows E58, the control has detected high current on a motor phase. The code is useful because it narrows the diagnostic path before any parts are replaced. Do not replace parts from the code alone; use the full model number and the observed symptoms to confirm the cause.
Treat this number as a diagnostic pointer rather than a parts verdict: high current on a motor phase. Do not choose a replacement part from the display alone; overloaded drum and motor or motor wiring problem can produce overlapping symptoms.
This record is based on the Electrolux technical/service documentation for the EFLS617SIW, EFLS517SIW, and EFLS417SIW control generation. The same display code can have a different meaning on another Electrolux platform, so confirm the full model number before applying this diagnostic path.
Signs
Symptoms you may notice
drum may struggle to accelerate
spin may stop or fail
washer may pause under a heavy load
Why it happens
Possible causes
overloaded drum
motor or motor wiring problem
motor-control board issue
mechanical resistance in the drive system
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Stop the cycle and remove some laundry if the drum is heavily overloaded.
Make sure the washer is level and the load can move freely.
Disconnect power for several minutes, then try a spin cycle with a smaller balanced load.
Stop if you hear grinding, smell overheating, or the drum will not turn normally.
Important safety warning. Stop if the drum is jammed, the washer smells overheated, or you hear grinding or repeated hard starts.
Get help
When to call a technician
If E58 returns after the safe checks, schedule repair. A technician can follow the model-specific diagnostic path and test the components associated with high current on a motor phase.
For a repeat E58, share the model and the behavior you saw, especially whether drum may struggle to accelerate. Professional testing can then confirm or rule out overloaded drum.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Washer Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
Electrolux EFLS617SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
Electrolux EFLS517SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
Electrolux EFLW417SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
It indicates high current on a motor phase. Confirm the full washer model because diagnostic meanings can vary between control platforms.
You can try the safe external checks listed above and one power reset where appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Avoid continued use if there is leaking, overheating, an electrical symptom, a locked door, or abnormal drum movement. Otherwise, correct any simple installation or load issue and test once.
References
Sources & references
Electrolux EFLS617SIW / EFLS517SIW / EFLS417SIW Technical & Service Manual, Error Code Table and model-specific troubleshooting.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
