Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codeEH2
ApplianceWasher
Affected model seriesEFLS617SIW, EFLS517SIW, EFLS417SIW
Quick answer
Electrolux washer code EH2 indicates supply voltage is too high.
Model compatibility: Electrolux reuses codes across series and control generations, so EH2 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
An Electrolux washer displaying EH2 is reporting supply voltage is too high. Start with the simple checks that are safe to do from outside the appliance, then stop if the code returns. Do not replace parts from the code alone; use the full model number and the observed symptoms to confirm the cause.
The safest interpretation keeps the platform context intact: supply voltage is too high. When washer may stop or restart, the code helps separate an external condition from possibilities such as unstable incoming power and supply voltage outside limits.
This record is based on the Electrolux technical/service documentation for the EFLS617SIW, EFLS517SIW, and EFLS417SIW control generation. The same display code can have a different meaning on another Electrolux platform, so confirm the full model number before applying this diagnostic path.
Signs
Symptoms you may notice
washer may stop or restart
code may appear after a voltage event
other power symptoms can occur
Why it happens
Possible causes
unstable incoming power
supply voltage outside limits
power-frequency issue
main control-board or relay issue
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Turn the washer off and disconnect it from power.
Check whether the breaker has tripped or other appliances on the circuit are behaving abnormally.
Do not use an extension cord or power strip.
If the supply appears unstable or the code returns, have the electrical supply and washer checked.
Important safety warning. Stop if the breaker repeatedly trips, the outlet shows heat or damage, or other appliances on the circuit are also affected.
Get help
When to call a technician
Book service if EH2 returns after a power reset. This code can involve internal wiring, controls, sensors, relays, pumps, or motor electronics that should be tested with the appliance made electrically safe.
Do not erase useful context with repeated resets. If EH2 returns, note whether washer may stop or restart and provide the full model number so unstable incoming power can be tested in the correct platform sequence.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Washer Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
Electrolux EFLS617SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
Electrolux EFLS517SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
Electrolux EFLW417SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
It indicates supply voltage is too high. Confirm the full washer model because diagnostic meanings can vary between control platforms.
You can try the safe external checks listed above and one power reset where appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Avoid continued use if there is leaking, overheating, an electrical symptom, a locked door, or abnormal drum movement. Otherwise, correct any simple installation or load issue and test once.
References
Sources & references
Electrolux EFLS617SIW / EFLS517SIW / EFLS417SIW Technical & Service Manual, Error Code Table and model-specific troubleshooting.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
