Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codeE64
ApplianceDryer
Affected model seriesEFME617SIW, EFMG617SIW, EFME517SIW, EFMG517SIW, EFME417SIW, EFMG417SIW
Quick answer
Electrolux dryer code E64 indicates heater open error.
Model compatibility: Electrolux reuses codes across series and control generations, so E64 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code E64 on an Electrolux dryer points to heater open error. Simple airflow, load, door, or installation checks may help in some cases; internal electrical testing should be left to a technician. Use the full model number before following any model-specific diagnostic procedure.
The code identifies a diagnostic condition, not a guaranteed failed component: heater open error. Do not choose a replacement part from the display alone; heater or heater relay problem and heater wiring issue can produce overlapping symptoms.
This record is based on Electrolux technical/service documentation for the 617, 517, and 417 front-load dryer generation, including EFME and EFMG electric/gas variants. Confirm the full model number because another control platform may use the same display code differently.
Signs
Symptoms you may notice
dryer may not heat correctly
cycle may stop during heating
temperature behavior may be abnormal
Why it happens
Possible causes
heater or heater relay problem
heater wiring issue
electronic control issue
temperature-protection circuit problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Stop the dryer if it is overheating, smells hot, or trips the breaker.
Clean the lint filter before the next test.
Check the external exhaust path for obvious restrictions.
Do not open the cabinet to test heater circuits unless you are qualified.
Important safety warning. Stop immediately if you smell overheating, see electrical damage, the breaker repeatedly trips, or the drum is mechanically jammed. Otherwise, stop after one safe reset/check cycle if the code returns.
Get help
When to call a technician
Schedule dryer repair if E64 returns after the safe checks. A technician can test the model-specific circuits associated with heater open error without guessing from the display alone.
If the display comes back, record E64, the model number, and whether dryer may not heat correctly. Those details help the repair visit start with checks around heater or heater relay problem instead of a generic parts swap.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Dryer Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
Electrolux EFME617SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
Electrolux EFMG417SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
It indicates heater open error. Check the model number because code meanings can vary by dryer platform.
A brief power reset is reasonable when there is no sign of overheating, wiring damage, or a tripped breaker. If the code returns, the underlying issue still needs diagnosis.
Do not continue if there is overheating, restricted airflow, electrical behavior, or abnormal drum movement. Correct any simple external issue and test only once.
