Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codei60
ApplianceDishwasher
Affected model seriesEI24ID50Q family
Quick answer
Electrolux dishwasher code i60 indicates water-heating system problem detected.
Model compatibility: Electrolux reuses codes across series and control generations, so i60 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
When i60 appears on your Electrolux dishwasher, it indicates water-heating system problem detected. Model and control-platform context matters before any part is condemned. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
The practical value of this code is that it narrows the next check: water-heating system problem detected. When water may not heat normally, the code helps separate an external condition from possibilities such as heating element issue and temperature-sensing problem.
This code is documented for Electrolux dishwasher platforms including the EI24ID50Q family. Confirm the exact model before applying service-level diagnostics.
Signs
Symptoms you may notice
water may not heat normally
cycle can run unusually long
drying performance may drop
Why it happens
Possible causes
heating element issue
temperature-sensing problem
heater wiring issue
electronic control problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Make sure hot water reaches the kitchen sink before starting a cycle.
Run one normal cycle after a brief power reset.
Do not access heater terminals or internal wiring.
Stop if you smell overheating or the breaker trips.
Important safety warning. Stop immediately for overheating, burning odor, or repeated breaker trips.
Get help
When to call a technician
Book repair if i60 returns because electrical heating-system tests are required.
A recurring i60 is more useful to a technician when you also report whether water may not heat normally. The next diagnostic path can then verify heating element issue against the control-platform documentation.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Dishwasher Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates water-heating system problem detected. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not continue if there is overheating, an electrical odor, or a breaker event. Otherwise, test once after the safe checks.
References
Sources & references
Electrolux EI24ID50Q use-and-care/error guide.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
