Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error code55
ApplianceInduction Cooktop
Affected model seriesE36IC75FSS platform
Quick answer
Electrolux induction cooktop code 55 indicates right-front element temperature sensor circuit is open.
Model compatibility: Electrolux reuses codes across series and control generations, so 55 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code 55 on an Electrolux induction cooktop is associated with right-front element temperature sensor circuit is open. Rule out simple external conditions first, then stop if the code comes back. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
This code belongs to a defined Electrolux control family: right-front element temperature sensor circuit is open. When a cooking zone may shut down, the code helps separate an external condition from possibilities such as temperature sensor circuit problem and poor internal connection.
This service-level code family is documented for the Electrolux ICON E36IC75FSS induction cooktop platform. Other Electrolux induction generations can use different displays or meanings.
Signs
Symptoms you may notice
a cooking zone may shut down
heating may be limited
the code may appear after extended cooking
Why it happens
Possible causes
temperature sensor circuit problem
poor internal connection
restricted cooktop ventilation
generator-board issue
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Turn the affected zone off and allow the cooktop to cool.
Remove cookware and make sure ventilation openings are not blocked.
Clean the area around the cooktop without introducing water into the controls.
After cooling, restore power and test briefly.
Important safety warning. Stop if the glass or cabinet becomes unusually hot, the code returns quickly, or ventilation cannot be restored.
Get help
When to call a technician
Temperature-sensor and generator-board checks for 55 require access to internal components.
When booking for 55, note the full model number and whether a cooking zone may shut down. A model-specific diagnosis can then concentrate on temperature sensor circuit problem without replacing parts by guesswork.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Cooktop Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates right-front element temperature sensor circuit is open. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not continue if the cooktop remains unusually hot or repeatedly shuts a zone down with the same code.
References
Sources & references
Electrolux E36IC75FSS service manual, induction error-code tables.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
