Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codei10
ApplianceDishwasher
Affected model seriesEI24ID50Q family
Quick answer
Electrolux dishwasher code i10 indicates low water fill detected.
Model compatibility: Electrolux reuses codes across series and control generations, so i10 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
If your Electrolux dishwasher displays i10, the control has detected low water fill detected. Start with the checks that are safe to perform without opening the appliance. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
The service meaning of this display is platform-dependent: low water fill detected. When dishwasher may pause during fill, the code helps separate an external condition from possibilities such as water supply valve not fully open and pinched or restricted inlet line.
This code is documented for Electrolux dishwasher platforms including the EI24ID50Q family. Confirm the exact model before applying service-level diagnostics.
Signs
Symptoms you may notice
dishwasher may pause during fill
little water may enter the tub
cycle may not advance normally
Why it happens
Possible causes
water supply valve not fully open
pinched or restricted inlet line
low incoming water flow
inlet valve or control issue
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Confirm the water shutoff valve is fully open.
Inspect the accessible inlet line for kinks or crushing.
Cancel the cycle and try one restart after restoring normal water flow.
Do not remove panels to test the inlet valve or wiring.
Important safety warning. Stop if there is active leaking or repeated fill attempts without normal water entry.
Get help
When to call a technician
Schedule repair if i10 returns after the water supply and inlet line are confirmed normal.
A recurring i10 is more useful to a technician when you also report whether dishwasher may pause during fill. The next diagnostic path can then verify water supply valve not fully open against the control-platform documentation.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Dishwasher Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates low water fill detected. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not continue repeated cycles if the dishwasher cannot fill normally. Correct an external water-supply issue once, then test one cycle.
References
Sources & references
Electrolux EI24ID50Q use-and-care/error guide.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
