Model compatibility: Electrolux reuses codes across series and control generations, so E67 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
When an Electrolux dryer shows E67, the control is reporting heater sensing error. The code narrows the diagnostic path, but it does not by itself prove which part needs replacement. Use the full model number before following any model-specific diagnostic procedure.
This display is most useful when it is paired with the model number and observed behavior: heater sensing error. The same display can accompany dryer may not heat correctly, so the next step is to rule out heater or heater relay problem before moving deeper into heater wiring issue.
This record is based on Electrolux technical/service documentation for the 617, 517, and 417 front-load dryer generation, including EFME and EFMG electric/gas variants. Confirm the full model number because another control platform may use the same display code differently.
Signs
Symptoms you may notice
dryer may not heat correctly
cycle may stop during heating
temperature behavior may be abnormal
Why it happens
Possible causes
heater or heater relay problem
heater wiring issue
electronic control issue
temperature-protection circuit problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Stop the dryer if it is overheating, smells hot, or trips the breaker.
Clean the lint filter before the next test.
Check the external exhaust path for obvious restrictions.
Do not open the cabinet to test heater circuits unless you are qualified.
Important safety warning. Stop immediately if you smell overheating, see electrical damage, the breaker repeatedly trips, or the drum is mechanically jammed. Otherwise, stop after one safe reset/check cycle if the code returns.
Get help
When to call a technician
Schedule dryer repair if E67 returns after the safe checks. A technician can test the model-specific circuits associated with heater sensing error without guessing from the display alone.
When booking for E67, note the full model number and whether dryer may not heat correctly. A model-specific diagnosis can then concentrate on heater or heater relay problem without replacing parts by guesswork.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Dryer Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
Electrolux EFME617SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
Electrolux EFMG417SIW repair and troubleshooting guide: common problems, safe checks, error-code context, repair guidance, and when to call a technician.
It indicates heater sensing error. Check the model number because code meanings can vary by dryer platform.
A brief power reset is reasonable when there is no sign of overheating, wiring damage, or a tripped breaker. If the code returns, the underlying issue still needs diagnosis.
Do not continue if there is overheating, restricted airflow, electrical behavior, or abnormal drum movement. Correct any simple external issue and test only once.
