Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error code35
ApplianceInduction Cooktop
Affected model seriesE36IC75FSS platform
Quick answer
Electrolux induction cooktop code 35 indicates ac input voltage is too low in the three-zone induction module.
Model compatibility: Electrolux reuses codes across series and control generations, so 35 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Electrolux induction cooktop code 35 points to ac input voltage is too low in the three-zone induction module. The display narrows the diagnostic path, but it does not prove which component should be replaced. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
Use the exact displayed characters when applying this record: ac input voltage is too low in the three-zone induction module. The same display can accompany one or more cooking zones may shut down, so the next step is to rule out incoming supply voltage outside the expected range before moving deeper into filter-board or power-board issue.
This service-level code family is documented for the Electrolux ICON E36IC75FSS induction cooktop platform. Other Electrolux induction generations can use different displays or meanings.
Signs
Symptoms you may notice
one or more cooking zones may shut down
the cooktop may refuse to heat
the code may appear after a power event
Why it happens
Possible causes
incoming supply voltage outside the expected range
filter-board or power-board issue
internal power connection problem
induction generator power-supply problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Turn the cooktop off at the breaker.
Do not use the cooktop through an extension or temporary power source.
If the code followed a household power event, restore power only after the supply is stable.
Do not remove the cooktop or test live power terminals yourself.
Important safety warning. Stop immediately if the breaker trips, wiring smells hot, or the cooktop behaves unpredictably.
Get help
When to call a technician
Voltage and induction power-board testing for 35 should be performed by a qualified technician.
When booking for 35, note the full model number and whether one or more cooking zones may shut down. A model-specific diagnosis can then concentrate on incoming supply voltage outside the expected range without replacing parts by guesswork.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Cooktop Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates ac input voltage is too low in the three-zone induction module. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not use the cooktop if supply voltage is unstable, a breaker trips, or there is an electrical odor.
References
Sources & references
Electrolux E36IC75FSS service manual, induction error-code tables.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
