Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codeE-11
ApplianceMicrowave
Affected model seriesE30MH65GPSA, E30MH65GSSA
Quick answer
Electrolux microwave code E-11 indicates gas sensor circuit is open.
Model compatibility: Electrolux reuses codes across series and control generations, so E-11 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
When E-11 appears on your Electrolux microwave, it indicates gas sensor circuit is open. Model and control-platform context matters before any part is condemned. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
Treat this number as a diagnostic pointer rather than a parts verdict: gas sensor circuit is open. The same display can accompany sensor cooking may not work, so the next step is to rule out gas/humidity sensor problem before moving deeper into sensor wiring issue.
This code set is documented for Electrolux over-the-range microwave models E30MH65GPSA and E30MH65GSSA. Do not apply these meanings to another microwave platform without model confirmation.
Signs
Symptoms you may notice
sensor cooking may not work
automatic cooking modes may cancel
code may appear when sensor functions are used
Why it happens
Possible causes
gas/humidity sensor problem
sensor wiring issue
control-board problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Disconnect the microwave from power for several minutes.
Make sure the interior is clean and dry.
Use a manual timed-cook mode only if the appliance otherwise operates normally and no safety symptom is present.
Do not remove the cabinet to inspect the sensor.
Important safety warning. Stop if the code returns or the microwave behaves abnormally.
Get help
When to call a technician
The E-11 gas-sensor circuit is internal and should be diagnosed by a trained microwave technician.
A returning E-11 should be diagnosed with the model-specific service path. Tell the technician whether sensor cooking may not work; that observation can help prioritize gas/humidity sensor problem.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Microwave Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates gas sensor circuit is open. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Avoid sensor modes if the code returns. Stop all use if there is overheating, electrical odor, or abnormal operation.
