Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codeF30
ApplianceRange Oven
Affected model seriesElectrolux range/oven platforms; verify exact model
Quick answer
Electrolux range/oven code F30 indicates oven temperature probe circuit is open.
Model compatibility: Electrolux reuses codes across series and control generations, so F30 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Electrolux range/oven code F30 points to oven temperature probe circuit is open. The display narrows the diagnostic path, but it does not prove which component should be replaced. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
For this control generation, the useful interpretation is specific: oven temperature probe circuit is open. The same display can accompany oven temperature may be inaccurate, so the next step is to rule out oven temperature probe issue before moving deeper into probe wiring problem.
Electrolux uses several oven-control generations. This page preserves the documented platform context and groups only display variants that share the same diagnostic path.
Signs
Symptoms you may notice
oven temperature may be inaccurate
preheat may stop or run too long
code may appear as heating begins
Why it happens
Possible causes
oven temperature probe issue
probe wiring problem
loose probe connection
electronic oven control issue
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Turn the oven off and allow it to cool.
Try one restart after power has been off for several minutes.
Do not remove the rear panel or test probe wiring while energized.
Use a separate oven thermometer only for observing temperature, not for bypassing the code.
Important safety warning. Stop if the oven overheats or the code returns.
Get help
When to call a technician
Probe resistance and harness testing for F30 should be done with the range made electrically safe.
If F30 returns, give the technician the exact model number, the code exactly as shown, and whether oven temperature may be inaccurate. That information helps focus testing on oven temperature probe issue and related platform-specific circuits.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Range Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates oven temperature probe circuit is open. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not continue if temperature control is unreliable or the oven overheats.
References
Sources & references
Current Electrolux US range guide.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
