Model compatibility: Electrolux reuses codes across series and control generations, so iF0 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code iF0 on an Electrolux dishwasher is associated with filter, sump, or drain-path restriction detected. Rule out simple external conditions first, then stop if the code comes back. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
The practical value of this code is that it narrows the next check: filter, sump, or drain-path restriction detected. Observed behavior such as water may remain in the tub should be recorded because it helps distinguish clogged filters or sump from restricted or pinched drain hose.
This code is documented for Electrolux dishwasher platforms including the EI24ID50Q family. Confirm the exact model before applying service-level diagnostics.
Signs
Symptoms you may notice
water may remain in the tub
cycle may stop during draining
filters or sump may contain debris
Why it happens
Possible causes
clogged filters or sump
restricted or pinched drain hose
disposer knockout plug not removed
drain pump or control issue
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Clean the removable filters and accessible sump area.
Check the drain hose for kinks or crushing.
If connected to a disposer, confirm the knockout plug was removed.
Run one cancel/drain cycle after correcting an external restriction.
Important safety warning. Stop if water is leaking onto the floor or the dishwasher repeatedly refills and drains abnormally.
Get help
When to call a technician
Book service if iF0 remains after the external drain path and filters are clear.
A recurring iF0 is more useful to a technician when you also report whether water may remain in the tub. The next diagnostic path can then verify clogged filters or sump against the control-platform documentation.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Dishwasher Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates filter, sump, or drain-path restriction detected. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Avoid repeated wash cycles while water remains in the tub. Correct accessible drain restrictions first and test one cancel/drain cycle.
References
Sources & references
Electrolux EI24ID50Q use-and-care/error guide.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
