Model compatibility: Electrolux reuses codes across series and control generations, so F40 / F41 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code F40 / F41 on an Electrolux range/oven is associated with cooktop lockout control problem. Rule out simple external conditions first, then stop if the code comes back. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
On this Electrolux platform, the code is a starting point for diagnosis: cooktop lockout control problem. A symptom such as cooktop may remain locked can fit more than one cause, including cooktop lockout control problem or wiring issue.
Electrolux uses several oven-control generations. This page preserves the documented platform context and groups only display variants that share the same diagnostic path.
Signs
Symptoms you may notice
cooktop may remain locked
lockout may not clear normally
controls may beep or ignore unlock commands
Why it happens
Possible causes
cooktop lockout control problem
wiring issue
electronic control problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Use the normal lock/unlock procedure from the owner guide.
Turn the range off at the breaker for several minutes if the lock will not clear.
Do not force controls or disassemble the lockout circuit.
Retry once after power is restored.
Important safety warning. Stop if the cooktop cannot be controlled safely.
Get help
When to call a technician
A recurring F40 / F41 lockout code needs control and wiring diagnosis.
When booking for F40 / F41, note the full model number and whether cooktop may remain locked. A model-specific diagnosis can then concentrate on cooktop lockout control problem without replacing parts by guesswork.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Range Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates cooktop lockout control problem. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not use the cooktop if the lockout system cannot be controlled normally.
References
Sources & references
Current Electrolux US range guide.
Ready to get your Electrolux appliance working again?
Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.
