Written by
Jordan Avery Appliance Repair Content SpecialistPublished August 17, 2026Technically reviewed August 19, 2026
Content status:
Verified
Error codeE-24
ApplianceMicrowave
Affected model seriesE30MH65GPSA, E30MH65GSSA
Quick answer
Electrolux microwave code E-24 indicates overheat condition detected during cooking.
Model compatibility: Electrolux reuses codes across series and control generations, so E-24 may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
If your Electrolux microwave displays E-24, the control has detected overheat condition detected during cooking. Start with the checks that are safe to perform without opening the appliance. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
On the models covered by this record, the code should be interpreted as follows: overheat condition detected during cooking. If you also notice microwave may stop cooking, compare that observation with temperature-sensor problem before assuming cooling or airflow issue.
This code set is documented for Electrolux over-the-range microwave models E30MH65GPSA and E30MH65GSSA. Do not apply these meanings to another microwave platform without model confirmation.
Signs
Symptoms you may notice
microwave may stop cooking
display may switch to a cancel state
cabinet may feel unusually hot
Why it happens
Possible causes
temperature-sensor problem
cooling or airflow issue
control problem
abnormal heating condition
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Stop the microwave and let it cool.
Make sure exterior ventilation openings are not blocked.
Do not run the oven empty.
Disconnect power and do not remove the outer case.
Important safety warning. Stop using the microwave if it overheats again, smells hot, or shows visible damage.
Get help
When to call a technician
Microwave high-voltage systems are dangerous even after unplugging; recurring E-24 overheat errors require professional service.
A recurring E-24 is more useful to a technician when you also report whether microwave may stop cooking. The next diagnostic path can then verify temperature-sensor problem against the control-platform documentation.
Seeing this code on your Electrolux appliance?
If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.
Electrolux Microwave Repair for common Electrolux problems, safe troubleshooting, error-code context, and signs it is time to schedule professional service.
It indicates overheat condition detected during cooking. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
No if the microwave overheats, smells electrical, or shows damage. Do not remove the cabinet.
