Skip to content
Electrolux Appliance Repair
Same-day and next-day appointments are often available — confirm with your ZIP code.
Independent appliance repair service. We are not affiliated with, authorized by, sponsored by, or endorsed by Electrolux.
(844) 917-2115
Error Code

Electrolux Microwave Error Code -SE-

Electrolux microwave code -SE- indicates key-short condition on the touch control.

Book Repair (844) 917-2115

Last reviewed August 19, 2026

Jordan Avery Written by Jordan Avery Appliance Repair Content Specialist Published August 17, 2026 Technically reviewed August 19, 2026

Content status: Verified

Error code -SE-
Appliance Microwave
Affected model series E30MH65GPSA, E30MH65GSSA
Quick answer

Electrolux microwave code -SE- indicates key-short condition on the touch control.

Model compatibility: Electrolux reuses codes across series and control generations, so -SE- may mean something different on another appliance or platform. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

Electrolux microwave code -SE- points to key-short condition on the touch control. The display narrows the diagnostic path, but it does not prove which component should be replaced. Use the observed symptoms and the full model number to confirm the correct diagnostic path.

Read this display narrowly on the documented control platform: key-short condition on the touch control. If you also notice keys may beep continuously, compare that observation with stuck touch key before assuming moisture or residue on the keypad.

This code set is documented for Electrolux over-the-range microwave models E30MH65GPSA and E30MH65GSSA. Do not apply these meanings to another microwave platform without model confirmation.

Signs

Symptoms you may notice

  • keys may beep continuously
  • a button may appear stuck
  • microwave may not accept commands
Why it happens

Possible causes

  • stuck touch key
  • moisture or residue on the keypad
  • touch-control panel problem
  • control-board issue
Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

  • Wipe the keypad dry with a soft cloth.
  • Make sure nothing is pressing against the controls.
  • Disconnect power for several minutes and retry.
  • Do not remove the control panel.

Important safety warning. Stop if the microwave starts or changes settings without a deliberate command.

Get help

When to call a technician

A returning -SE- key-short code needs touch-panel or control-board service.

For a repeat -SE-, share the model and the behavior you saw, especially whether keys may beep continuously. Professional testing can then confirm or rule out stuck touch key.

Seeing this code on your Electrolux appliance?

If the code returns after the safe checks, book a repair visit and share the exact display plus your full model number.

Book Repair (844) 917-2115
FAQ

Frequently asked questions

References

Sources & references

  • Electrolux E30MH65GPSA/E30MH65GSSA technical/service manual, error-code table.

Ready to get your Electrolux appliance working again?

Book a repair visit and share your full model number plus any displayed code so diagnosis can start on the right path.

Book Repair (844) 917-2115
Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Address 1200 Brickell Bay Drive, Suite 200, Miami, FL 33131
Phone (844) 917-2115
Email service@electroluxrepair.local
Hours Mon–Fri 8:00 AM – 6:00 PM · Sat 9:00 AM – 2:00 PM
Service area We currently serve the Miami, New York, Houston, Los Angeles and San Diego metro areas, including many surrounding communities.
Response time Same-day and next-day appointments are often available — confirm with your ZIP code.
Directions View on map

Request your repair

Fields marked with * are required.

(844) 917-2115 Book Repair